3 Amp Furnace Fuse

Can you change 3MPSE to 5MPSE without any effect?

You can, but it is not recommended.

The cable causes more heat and significant damage. If the system has SRT, the cable should be used to prevent it from burning. Will explode

Avoid jobs and use if appropriate for the job, avoid high repair costs.

3 Amp Furnace Fuse

As Brian M. said, not at all! If you take a different SE and put it in the SE, it increases the risk of burning the circuit board. If it's still at 3MP, I recommend calling a service technician. There is a reason for this and you need to know why a small problem becomes a big problem.
no
Never replace Se with a large capacity. You probably have this because the wall wire can't handle the extra power.
In addition to the loss issue, you can add people.
The inspector will look the wrong way and your insurer will deny the claim and things will move from left to right.
In your case, the board may have SRT and it may need to be replaced, no one bigger than this will help.
no! One reason for this is that a certain amount of current has to be combined with a circuit breaker. It protects other devices on the phone. You must first find out the cause of the seizures. Use a different sound than suggested and it will replace more parts than you want.
Absolutely not. Never replace SE with any major. for you. Otherwise, you could overheat the wires and cause more severe damage than those found on Earth.
You should not be replaced by a supervisor because the results can be bad, they can